Pleiad Compact G3

Fagerhult Pleiad Compact G3

Installation

Recessed mounting in unventilated or ventilated ceilings. Separate ballast and installation clip for easy and tool-free installation supplied as standard. An assembly plate must be used when mounting on soft tile ceilings.
The luminaire must not be covered with insulation. For further details please refer to the assembly instructions on our website.

Connection

Connections are made to an independent LED ballast. The luminaire is delivered with the interconnecting cable with snap-in release in ballast

Design

Luminaire body in black cast aluminium. Visible reflector ring in white PC plastic (RAL 9003).

Reflector

Reflector in either specular or matt anodised aluminium. Bright metallised Advanced Anti-Glare Control ring above the LED module. Mechanical shielding 25°.

Miscellaneous

The luminaire is supplied with dust protection over the light opening. Enclosure class IP 44 under suspended ceilings and IP 20 above suspended ceilings.

LED-information

3000 K/4000 K: CRI min. 80, L70 50 000 h, MacAdam 3 SDCM.

To see other functions/ballasts than those shown here, select from the menu below.


Click on the green symbol to download the individual photometric file for the selected luminaire.

Luminaire dimensions

Polar diagram


Specular reflector
  

Assembly plate

For assembly in soft tile ceilings. Stable cardboard. The cardboard has cut-outs to suit all diameters.

 
DescriptionCat. no.

Assembly plate

41956

 

Cilindriq rills

Opal structured shade with grooves in the opening and white Edge ring III.

 
DescriptionCat. no.

Ø 165 mm, white (RAL 9016)

41935

 

Contra

Grey finished cross louvre with intensive coloured centre cone and grey Edge ring III.
Matt reflector recommended.

 
DescriptionCat. no.

Ø 165 mm, alu

41889

Ø 165 mm, aqua

41883

Ø 165 mm, blue

41880

Ø 165 mm, green

41886

 

Cover plate clear IP 64

This accessory consists of Edge ring III and a clear polycarbonate disc.

 
DescriptionCat. no.

Ø 165 mm, grey (RAL 9006)

41844

Ø 165 mm, matt aluminium

41848

Ø 165 mm, white (RAL 9016)

41840

 

Cover plate Delta IP 20

This accessory consists of Edge ring III and a microprism disc in clear acrylic.

 
DescriptionCat. no.

Ø 165 mm, grey (RAL 9006)

42035

Ø 165 mm, matt aluminium

42039

Ø 165 mm, white (RAL 9016)

42031

 

Cover plate opal IP 54

This accessory consists of Edge ring III and an opal polycarbonate disc.

 
DescriptionCat. no.

Ø 165 mm, grey (RAL 9006)

41864

Ø 165 mm, matt aluminium

41868

Ø 165 mm, white (RAL 9016)

41860

 

Edge ring II

The edge ring hides the lower edge of the reflector and is attached by means of a bayonet fixing. White or grey plastic or matt brushed aluminium surface.

 
DescriptionCat. no.

Ø 165 mm, grey (RAL 9006)

41904

Ø 165 mm, matt aluminium

41908

Ø 165 mm, white (RAL 9016)

41900

 

Edge ring III

The edge ring hides the lower edge of the reflector and is attached with a bayonet fixing. White or grey plastic or matt brushed aluminium surface.

 
DescriptionCat. no.

Ø 165 mm, grey (RAL 7040)

41924

Ø 165 mm, matt aluminium

41928

Ø 165 mm, white (RAL 9016)

41920

 

Ice

Sandblasted glass ring to be attached to the luminaires edge ring.

 
DescriptionCat. no.

Ø 165

41315

 

Opus

Opal structured shade and white Edge ring II. Matt reflector recommended.

 
DescriptionCat. no.

Ø 165 mm, white (RAL 9016)

41745

 

Plane

Thin brushed plain aluminium ring, attached to the luminaire edge ring.

 
DescriptionCat. no.

Ø 165

41355

 

Retrofit kit

This accessory consists of an Edge ring, white enamelled (RAL 9016) steel sheet disc and a mounting plate (included). The accessory fits Pleiad G2 165 and all recessed Pleiad G3 and allows the luminaire to be installed in the existing aperture in the ceiling, Ø 165-255 mm.

 
DescriptionCat. no.

Retrofit kit

41339

 

Ring

Opal or coloured ring and white Edge ring III. Matt reflector recommended.

 
DescriptionCat. no.

Ø 165 mm, blue

41970

Ø 165 mm, green

41976

Ø 165 mm, opal

41979

 

Ringlight

The Ring light unit is attached to the luminaire's edge ring with a bayonet fixing. Designed without visible screws. Two blasted glass rings with matt brushed aluminium edge ring or white finished sheet steel.
Matt reflector recommended.

 
DescriptionCat. no.

Ø 165 mm, blasted glass

41754

Ø 165 mm, white (RAL 9016)

41750

 

Sloping ceiling cylinder

White enamelled sheet steel. Special brackets are included. Please state required angle. Max sloping ceiling stated below.

 
DescriptionCat. no.

Sloping ceiling cylinder

41638

 

Support

For assembly in soft tile ceilings. Consists of an assembly plate and support bars. The support's profile is adapted for 600 and 625-module.

 
DescriptionCat. no.

600 mm

41958

625 mm

41959